J 類熔斷器
真正雙元件熔絲，在 500% 過載時具有至少 10 秒的延時
雙元件結構可減少功率損耗并使運行溫度更低
高斷開容量： 300kA
額定電壓 600V 交流
由于對短路的快速響應，因此具有高電流限制
獨特的尺寸可確保不同的熔斷器不能被替換
庫存號 513-0623 和 513-0718 具有插片接線端子
UL 248-8 J 類
UL 認可；CSA 認證
Want to safeguard your equipment from damage through current overload? Turn to this centred tag fuse from the Eaton Bussmann series. It's suitable for installation in many applications thanks to its compact size of 1.13 (W) x 4.63in (H). The current-limiting component clears a current fault within its first seconds and protects other components unable to withstand thermal and magnetic forces. This fuse has a low electrical resistance so it runs at a cooler temperature and is less likely to break or overheat.
? High rupture capacity or interrupt rating of up to 300,000A for maximum protection against current surges
? True-dual element fuse with minimum 10 second time-delay at 500% overload to pass harmless motor or current surges
? Current rating of 100A for safe use in medium-voltage applications
This fuse's speed is marked as Class T also known as slow-acting (Trage). A Class T fuse has a built-in delay triggering slow-acting reaction to harmless current surges and temporary overload but will speedily act on sustained current overloads or short circuits.
Eaton formerly known as Eaton Bussmann
美國標準熔絲管，包括快熔式小型和雙元件延時類型
| 屬性 | 數值 |
|---|---|
| 額定電流 | 100 A |
| 熔斷器尺寸 | 1.13 x 4.63in |
| 額定電壓 | 300 V ac, 600 V 交流 |
| 固定中心 | 92.2mm |
| 焊接寬度 | 19.05mm |
| 熔斷器速度 | T |
| 高分斷能力熔斷器 | 是 |
| 總體長度 | 117.6mm |
| 主體直徑 | 28.7mm |
| 標準方向 | 中心 |
| 主體長度 | 66.8mm |
